Seneca S6001, User Manual

Page: 30 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
30 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
ANALOGUE INPUTS/OUTPUTS
No. 1 inverter, No. 3 pumps
37 GND ALARM SIGNAL GND
38 ALARM OUT ALARM SIGNAL
39 - -
40 LEVEL 2 CONFIGURABLE
41 LEVEL 1 CONFIGURABLE
42 COM. LEVEL LEVEL COMMON
43 I IN1 FEEDBACK Hz INVERTER (option)
44 I IN2 CONFIGURABLE
45 I IN3 CONFIGURABLE
46 I IN4 ADJUSTMENT PROBE (FT-PT-LT)
47 I OUT INVERTER Hz REFERENCE (*)
48 V OUT INVERTER Hz REFERENCE (*)
49 +13V +V ANALOG I/O
50 GND I/O ANALOG GND
(*) Signal not bound to the configuration but it is mandatory to select at least one “I OUT” or “V OUT” output for
the correct operation of the system. Selection to be operated according to the type of input the inverter requires.
Tab. 27 RTU settings for Configurations 1 and 2: Analogue inputs/outputs