Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
52 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
- Press the key to enable/disable the mobile network.
- Press on the “PIN SIM” field to enter the SIM PIN using
the displayed keypad.
- Press on the remaining fields to enter the network data
using the displayed keypad.
- If necessary, press the key to return to the previous
screen.
Fig. 30
Pressure/flow wizard - Mobile network
The mobile network data is provided by the mobile service provider.
- Press on the “STATION NAME” field to enter the station
name using the displayed keyboard.
- If necessary, press the key to delete the entered
name.
- Press the
key to complete the configuration
procedure.
Fig. 31
Pressure/flow wizard - Station name
When an alphanumeric field is pressed, the
(G -
Fig. 46 on page 60)
keypad for entering
the data is displayed.
By default, the logged-in user is admin. The admin user with the highest privileges will be disconnected
automatically after 10 minutes of inactivity.
1.3.2
Level configuration wizard
Follow the wizard steps to configure the system. Find below the screens displayed sequentially by the wizard.
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
