Seneca S6001, User Manual

Page: 100 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
100 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
Code
Alarm
Description Cause Solution
OT007 P2 ANOMALY
OT009 P3 M/A INCONSISTENCY
See CAUSE and SOLUTION
of ALARMS OT001, OT002,
OT003
OT010 P3 THERMAL SWITCH
OT011 P3 ANOMALY
OT013 P4 M/A INCONSISTENCY
See CAUSE and SOLUTION
of ALARMS OT001, OT002,
OT003
OT014 P4 THERMAL SWITCH
OT015 P4 ANOMALY
OT017 P5 M/A INCONSISTENCY
See CAUSE and SOLUTION
of ALARMS OT001, OT002,
OT003
OT018 P5 THERMAL SWITCH
OT019 P5 ANOMALY
OT021 P6 M/A INCONSISTENCY
See CAUSE and SOLUTION
of ALARMS OT001, OT002,
OT003
OT022 P6 THERMAL SWITCH
OT023 P6 ANOMALY
OT028
VERY HIGH ADJUSTMENT
PROBE
The adjustment probe con -
nected to analogue input AI4
measures a level lower than the
value set for parameter HH in
the SETPOINT> ANALOGUE
THRESHOLDS section of the
HMI panel
- Check the correct configu -
ration of the digital inputs in
the SETPOINT > ANALOGUE
THRESHOLDS section of the
HMI panel. Check the wiring of
the adjustment probe is correct.