Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
76 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
1.1.7.5 “PID parameters” screen
68
69
70
71
72
Fig. 62 “PID parameters” screen
68
Field to display and enter the proportional band value. Press on the field to enter the value of
the proportional band using the numeric keypad.
69
Field to display and enter the integral time value. Press on the field to enter, using the keypad,
the integral time value.
70
Field to display and enter the derivative time value. Press on the field to enter the derivative
time value using the keypad.
71
Field to display and enter the lower limit value. Press on the field to enter, using the keypad,
the lower limit value.
72
Field to display and enter the upper limit value. Press on the field to enter the upper limit value
using the keypad.
Tab. 61 “PID parameters” screen
An incorrect entry of values can lead to the incorrect operation of the system. Modify the parameters
only
if they are based on their meaning.
We recommend that you use the preset values if you do not know their meaning.
There is no unique optimal setting of these parameters; they must be calibrated empirically according
to the type of application for which the system is intended.
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
