Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
63 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
1.1.3 “Pumps” page
The “Pumps” page
(Fig. 50 on page 63)
allows managing the operating mode of the pump group and
monitoring the correct operation of the system.
5
8
6
7
10
9
11
Fig. 50 “Pumps” page
5
System manual/automatic selector. In “AUTO” mode the pumps are managed autonomously
by the RTU, in the “MAN” mode it is possible to manage the individual pumps manually.
Press on the selector to set the pump group operating mode. The red indicator moves to the
selected operating mode.
6
Pump display area. For each pump there is a box that shows the word “MAN” if set in man
-
ual mode, “AUTO” if set in automatic operating mode. The box is green if the corresponding
pump is driven by the inverter, otherwise it is grey. The pumps can be one of the following
colours:
- red, if broken;
- green, if active;
- grey, if switched off.
If selector
(5)
is set to MAN, it is possible to control the individual pump. Press on the desired
pump to access the “Single pump” screen
(Fig. 51 on page 64)
.
7
Analogue indication of the value of the process variable (PV).
8
Indication of the full scale value of the process variable (PV).
9
Graphical indication of the process variable (PV) in real time (blue histogram).
10
Digital indication of the value of the process variable (PV).
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
