Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
64 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
11
Digital indication of the Set Point (SP) value. The indication is positioned on the histogram
corresponding to the value shown. The Set Point indication is not present for the “level con
-
trol” application, as it is not required.
Tab. 49 “Pumps” page
1.1.3.1
“Individual pump” screen
13
12
14
Fig. 51 “Individual pump” screen
12
Pump information display area. “Pump status” (RUN, RUN WITH VARIABLE SPEED, STOP,
FAULT), “Operating mode” (MANUAL ON, MANUAL OFF, AUTOMATIC) and pump image are
displayed. The pump can be one of the following colours:
- red, if broken;
- green, if active;
- grey, if switched off.
13
Operating mode selector. Drag the key to “AUTO” to set the automatic operating mode for the
pump; drag the key to “MAN” to set the manual operating mode for the pump.
14
Pump manual start/stop button. Press the button to start/stop the pump; the blue indicator
moves to “STOP” if the pump is stopped, to “START” if it is started. The key is enabled only
if selector
(13)
is on “MAN”.
Tab. 50 “Individual pump” screen
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
