Seneca S6001-RTU, User Manual

Page: 136 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
136
operating mode of the Digital Input
1 (DI 1).
Since this is the digital input used for
“Remote
Connection
Disable”
feature, its value (“Remote
connection disable”) cannot be
changed.
Output 1 Mode This parameter represents the
operating mode of the Digital
Output 1 (DO 1).
Since this is the digital output used
to monitor remote connection, its
value (“Remote connection active”)
cannot be changed. Remote connection active
Input 2 Mode This parameter represents the
operating mode of the Digital Input
2 (DI 2).
Possible modes are: “General input”
| “Local alarm”. General input
Output 2 Mode This parameter represents the
operating mode of the Digital
Output 2 (DO 2).
Possible
modes are: “General
output” | “Remote toggle”
20
.
General output
Input/Output 1 Mode This parameter represents the
operating mode of the Digital
Input/Output 1 (first configurable
digital I/O) (DIDO 1).
Possible modes are: “General input”
| “General output”. General input
Input/Output 2 Mode This parameter represents the
operating mode of the Digital
Input/Output 2 (second configurable
digital I/O) (DIDO 2).
Possible modes are: “General input”
| “General output”. General output
Service Disable This parameter determines which access
services are disabled when “Remote
Connection Disable” digital input is
HIGH.
Possible values are: “VPN Connection” |
“VPN Service” | “Internet Connection” |
“SMS Service”.
See chapter 13, for a detailed VPN Connection
20
“Remote toggle” function is still to be defined.