Seneca S6001-RTU, User Manual

Page: 27 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
27
5.3 Z-PASS2-S-IO
LED Status Meaning
PWR Green ON The module is powered on
RUN Green Blinking The module is ready for use
DIDO1 Green ON
OFF
Configurable Digital Input/Output 1 state is HIGH
Configurable Digital Input/Output 1 state is LOW
DIDO2 Green ON
OFF
Configurable Digital Input/Output 2 state is HIGH
Configurable Digital Input/Output 2 state is LOW
DI Green ON
OFF
Digital Input state is HIGH
Digital Input state is LOW
DO Green ON
OFF
Digital Output state is HIGH
Digital Output state is LOW
RCD Green ON
OFF
Remote Connection is disabled
Remote Connection is enabled
VPN Green ON
Blinking
OFF
VPN connection is working properly
VPN connection is not working properly
VPN functionality is disabled or
VPN Box/Point-to-Point functionality is enabled but no client is connected or
VPN Box/Single LAN functionality is enabled but the Device is not configured
yet
LAN/WAN
Green ON
OFF
The Ethernet ports are working in “LAN/WAN” mode
The Ethernet ports are working in “Switch” mode
SERV Green ON
Blinking
OFF
VPN Box “SERVICE” connection is working properly
VPN Box “SERVICE” connection is not working properly
VPN Box functionality is disabled
RX2-4 Green Blinking
ON
OFF
Data reception (COM 2-4)
Check the connection (COM 2-4)
No data reception (COM 2-4)
TX2-4 Green Blinking
ON
Data transmission (COM 2-4)
Check the connection (COM 2-4)