USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
112
This page lets you save and load the whole Device configuration; this is very useful, for example, when you
have to apply the same configuration to many devices.
The configuration archive file is named SW002940_conf.tar.gz; its contents depend on the selected option,
as shown in the following table:
Option
Files
All (Conf. + PLC App.)
- configuration parameters
- OpenVPN configuration (if present)
- PLC (Straton) application (if present)
- web user pages (if present)
Configuration
- configuration parameters
- OpenVPN configuration (if present)
PLC Application
- PLC (Straton) application (if present)
- web user pages (if present)
The configuration archive, once created and downloaded by means of the “SAVE” button can be uploaded
to the same or another device, in two ways:
by means of the “LOAD” button, in this page
by means of a USB pen
The procedure to load the configuration into the Device by means of a USB pen is the following:
copy the SW002940_conf.tar.gz (or SW002940_conf.zip, see below) file into the root folder of the
USB pen;
switch off the Device;
insert the USB pen into the USB#1 port of the Device;
switch on the Device; the procedure will take some minutes to be completed; during this time, the
Device MUST NOT be switched off; during the procedure, the Device will be rebooted;
after the reboot, wait until you see the “RUN” LED blinking;
remove the USB pen;
the configuration has been applied to the Device.
The only care when you carry the configuration archive from a device to another one is that the two
devices should be the same product model; for example, it’s not safe to load the configuration archive
saved on a Z-PASS2-S-R01 into a Z-PASS2-S.
This page lets you load also the configuration archive created by Z-NET4 SW (see chapter 20) as a zip file
(SW002940_conf.zip).
Another useful feature available in this page is the one provided by the “Save Debug Logs / SAVE” button:
when you click on it, a file named SW002940_logs.tar.gz is downloaded, which contains the debug logs
stored by the CPU during its operation.
Summary of Contents for S6001-RTU
