Seneca S6001-RTU, User Manual

Page: 29 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
29
VPN Box/Single LAN functionality is enabled but the Device is not configured
yet
LAN/WAN
Green ON
OFF
The Ethernet ports are working in “LAN/WAN” mode
The Ethernet ports are working in “Switch” mode
SERV Green ON
Blinking
OFF
VPN Box “SERVICE” connection is working properly
VPN Box “SERVICE” connection is not working properly
VPN Box functionality is disabled
RX2-4 Green Blinking
ON
OFF
Data reception (COM 2-4)
Check the connection (COM 2-4)
No data reception (COM 2-4)
TX2-4 Green Blinking
ON
OFF
Data transmission (COM 2-4)
Check the connection (COM 2-4)
No data transmission (COM 2-4)
Ethernet Connector LEDS
LED Status Meaning
ETH1-2 Green ON
OFF
Ethernet 1-2 connection detected
Ethernet 1-2 connection absent
ETH1-2 Yellow Blinking
OFF
There is data activity (Ethernet 1-2)
There is no data activity (Ethernet 1-2)
5.5 S6001-RTU
Frontal LEDS
Group Number Colour Status Meaning
Digital Inputs 1,2,3,4,5,6,7,8
9,10,11,12,13,14,15 Green ON
OFF High
Low
Digital Outputs 1,2,3,4,5,6,7,8 Red ON
OFF Closed
Open
3G Power Signal 2,3,4,5,6
Yellow
OFF ON
6 ON = Max
1 Blinking ON
1 Blinking = Min
Comm. Port COM2 RX, TX Red Blinking RS485 activity
Red Fixed ON Verify connection
Comm. Port COM4 RX, TX Red Blinking RS485 activity
Red Fixed ON Verify connection