Seneca S6001-RTU, User Manual

Page: 150 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
150
This page lets you run scan procedures to search for M-Bus devices and read data from the detected
devices.
To let these procedures properly work, you have to:
- connect the Seneca “Z-MBUS” RS232-MBUS adapter to the COM1 serial port;
- set the COM1 mode to Z-MBUS (see paragraph 18.1.2).
The “SECONDARY SCAN” button lets you scan the bus, detecting M-Bus secondary addresses; select the
correct baud-rate for the COM1 serial port or select “All” to repeat the scan for any possible baud-rate
23
;
then click on the button; a confirmation pop-up will be shown.
After confirming, the following page will be shown.
23
Actually, the “All” option executes the scan for all possible baud-rates, except for 38400, that is: 300, 600, 1200,
4800, 9600, 19200; 38400 value can be selected separately.