USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
47
ports of an Ethernet switch; the user can choose between the “LAN/WAN” mode and the “Switch” mode,
by means of a configuration parameter (“Ethernet Mode”) (see paragraph 18.1.2).
The “LAN/WAN” mode is needed when the “industrial” network connected to the LAN interface
(comprising e.g. HMI and PLC devices) shall be separated from the “enterprise” network connected to the
WAN interface (comprising enterprise PCs and servers); when the Device is remotely accessed through the
WAN interface, only devices connected to the LAN interface can be reached, while access to machines lying
in the enterprise network is forbidden; this is depicted in the following two figures.
When this separation is not needed or when the Internet access is achieved only through the mobile (3G+)
interface, the “Switch” mode still lets the Device be used as an Ethernet switch, as shown in the following
figure.
Summary of Contents for S6001-RTU
