Seneca S6001-RTU, User Manual

Page: 66 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
66
collegamento ipertestuale non
valido.
>
WEB SERVER/HTTPS Port TCP port to access the
configuration and user pages, using
HTTPS protocol.
443
Default URL for conf pages:
Errore. Riferimento a
collegamento ipertestuale non
valido.
Default URL for user pages:
Errore. Riferimento a
collegamento ipertestuale non
valido.
FILE TRANSFER/Protocol Protocol used for File Transfer:
FTP/SFTP, SFTP, FTP FTP/SFTP
FTP Port TCP Port for FTP protocol 21
SFTP Port TCP Port for SFTP protocol 22
LOG FOLDER SHARING/Enable Flag to enable/disable the sharing
of the “/log” directory (by means
of “Samba” service) ON
PLC/Straton TCP Port TCP port to connect to the Straton
server 502
PLC/Straton Redundancy Enable Flag to enable/disable the Straton
Redundancy functionality OFF
PLC/Straton Redundancy IP
Address
IP address of the second Device
used for Straton Redundancy 192.168.90.102
PLC/License Key Key to enable/disable Energy
Protocol functionalities in Straton
(see paragraph 8.2) 1122334455667788 (dummy
value)
11
NETWORK REDUNDANCY/Enable Flag to enable/disable the
“Network Redundancy”
functionality, that is using the
Ethernet interface as the primary
interface to access the Internet and
the Mobile interface as the
secondary interface, if the access
through the primary interface
becomes unavailable
OFF
NETWORK REDUNDANCY/Ping
Address IP Address used as ping destination
to check if access to the Internet
through the primary interface
(Ethernet) is available.
This address shall be different from
the one set for “DNS Server” 8.8.4.4
11
The correct License Key string is provided by Seneca.