Seneca S6001-RTU, User Manual

Page: 152 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
152
The baud rate value shown in the table header remembers the parameter choice for the last scan
procedure.
The table with the detected M-Bus devices is stored in a permanent way, so after switching off and on the
CPU, the results of the last scan are still available; they will be overwritten by the next scan or deleted by a
factory reset (“FACTORY DEFAULT” button in “Main View” page).
In the same way the “PRIMARY SCAN” button lets you scan the bus, detecting M-Bus primary addresses;
select the correct baud-rate for the COM1 serial port or select “All” to repeat the scan for any possible
baud-rate
24
.
You can read data from one of the devices, by selecting the corresponding row and clicking on the “READ
DATA” button; you come to a page like the following.
24
Actually, the “All” option executes the scan for all possible baud-rates, except for 38400, that is: 300, 600, 1200,
4800, 9600, 19200; 38400 value can be selected separately.