Seneca S6001-RTU, User Manual

Page: 1 / 210

Page 1
MI003773
MI003770_121
SENECA s.r.l.
Via Austria, 26
– 35127 – Z.I. CAMIN – PADOVA – ITALY
Tel. +39.049.8705359
– 8705408 Fax. +39.049.8706287
Web site: www.seneca.it
Support: supporto@seneca.it (IT), support@seneca.it (Other)
Sales: commerciale@seneca.it (IT), sales@seneca.it (Other)
USER MANUAL
Z-TWS4
Z-PASS2-S
S6001-RTU
This document is property of SENECA srl. Duplication and reprodution are forbidden, if not authorized. Contents of the present documentation refers to products and
technologies described in it. All technical data contained in the document may be modified without prior notice Content of this documentation is subject to periodical
revision.
To use the product safely and effectively, read carefully the following instructions before use. The product must be used only for the use for which it was designed and
built. Any other use must be considered with full responsibility of the user. The installation, programmation and set-up is allowed only for authorized operators; these
ones must be people physically and intellectually suitable. Set up must be performed only after a correct installation and the user must perform every operation described
in the installation manual carefully. Seneca is not considered liable of failure, breakdown, accident caused for ignorance or failure to apply the indicated requirements.
Seneca is not considered liable of any unauthorized changes. Seneca reserves the right to modify the device, for any commercial or construction requirements, without
the obligation to promptly update the reference manuals.