Seneca S6001-RTU, User Manual

Page: 31 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
31
This application shows the IP address, MAC address, FW version and some other useful information, for
every Z-TWS4/Z-PASS2-S/S6001-RTU device (and other Seneca products) found in the LAN.
Moreover, by clicking on the “Assign” button, it is possible to change the network configuration parameters
of a device, as shown in the following figure:
For security reasons, this feature can be disabled on the Device (see paragraph 18.1.2); in this case, the
following error message is shown, after clicking on the “Assign” button”.