Seneca S6001-RTU, User Manual

Page: 7 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
7
Date Revision Notes
06/09/2016 07 - Chapter "Features": new features forZ-PASS2-S-R01
- Chapter "LEDs signalling": new par. " Z-PASS2-S-R01"
- New chapter "Ethernet Mode (Z-PASS2-S-R01)"
- Chapter: "Discovering the IP address": network parameters setting
- Chapter "Upgrading the firmware by a USB pen": revision
- Par. "Web Configuration Pages/Administrator pages": changed
paragraphs:
- "Main View"
- "Network and Services"
- "Router Configuration"
- "FW Upgrade"
new paragraphs:
- "VPN Configuration/OpenVPN Client/LED signalling (Z-PASS2-S-R01)"
- "VPN Configuration/VPN Box/LED signalling (Z-PASS2-S-R01)"
- Par. "Web Configuration Pages/User pages"
changed paragraphs:
- "Main View"
- "Network and Services"
11/01/2017 08 - Renamed “Z-PASS2-S-1” → ”, “Z-PASS2-S-R01”
- Chapter “Discovering the IP address”: discovery working on both LAN
and WAN interfaces
- New chapter “Network Redundancy”
- Paragraph “Main View” revision (also for “User Pages”)
- Paragraph “Network and Services”: added “DNS Mode” parameter
and Network Redundancy parameters; changed some default values
(also for “User Pages”)
- Paragraph “Real Time Clock Setup”: added “Central Europe” time
zone value
- Paragraph "VPN Configuration/OpenVPN Client": revision into "VPN
Configuration/OpenVPN”; added packet/byte counters description
- Paragraph "VPN Configuration/VPN Box”: added packet/byte counters
description
- Paragraph “Mobile Network”: added packet/byte counters
description
- Paragraph “Router Configuration”: Port Mapping parameters no more
disabled when “Use Local Addresses” is ON
- Paragraph “Users Configuration”: added “guest” user credentials
- New paragraph “Ethernet Interfaces”
- New paragraph “Modbus Modules”
- New paragraph “Data Logs”
- New paragraph “Guest Pages”
- StratON FBs and Functions, new paragraphs: GET_ALARMS,
PUT_ALARM, SET_ALARMS_STAT, FM_WRITE_NCRLF, TXBAPPENDFILE,
GET_MIN_SINCE2K
- Chapter Z-NET4: added note to “Remote Control Functions”
01/03/2017 09 - New paragraph “Configuration Management”
- PLC application name shown in the web pages header
- “Use Local Address through VPN” parameter: “ON” option always
available
- Paragraph “Network and Services” (Admin and User): changed default
value for “Default Gateway” and “DNS Server” parameters; “Default
Gateway” always in the WAN subnet, in LAN/WAN mode; “DHCP on
LAN” disabled, in LAN/WAN mode