Seneca S6001-RTU, User Manual

Page: 28 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
28
OFF No data transmission (COM 2-4)
3G PWR Green ON The 3G Modem is powered on
STAT Yellow Slow blinking
(200 ms OFF,
1800 ms ON)
Slow blinking
(1800 ms OFF,
200 ms ON)
Fast blinking
(125 ms OFF, 125
ms ON)
Searching for GSM network
Registered on GSM network
Data transfer is ongoing
Ethernet Connector LEDS
LED Status Meaning
ETH1-2 Green ON
OFF
Ethernet 1-2 connection detected
Ethernet 1-2 connection absent
ETH1-2 Yellow Blinking
OFF
There is data activity (Ethernet 1-2)
There is no data activity (Ethernet 1-2)
5.4 Z-TWS4-IO
LED Status Meaning
PWR Green ON The module is powered on
RUN Green Blinking The module is ready for use
DIDO Green ON
OFF
Configurable Digital Input/Output state is HIGH
Configurable Digital Input/Output state is LOW
DO Green ON
OFF
Digital Output state is HIGH
Digital Output state is LOW
RCD Green ON
OFF
Remote Connection is disabled
Remote Connection is enabled
VPN Green ON
Blinking
OFF
VPN connection is working properly
VPN connection is not working properly
VPN functionality is disabled or
VPN Box/Point-to-Point functionality is enabled but no client is connected or