Seneca S6001-RTU, User Manual

Page: 119 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
119
on it
17
Operator Selection/Mode
(only on Z-PASS2-S-IO) This parameter tells if the modem shall
select the Mobile Network Operator:
-
automatically (Mode=Automatic)
- as selected by the user
(Mode=Manual)
- reverting to “automatic” mode, if
“manual” selection fails (Mode =
Manual/ Automatic)
Automatic
Operator Selection/Operator
(only on Z-PASS2-S-IO) This parameter contains the list of the
Mobile Network Operators currently
available, that is detected by the
modem.
The list items are strings with the
following format:
-
the MCC+MNC
18
code in square
brackets (e.g.: “[22201]”)
- the string identifying the operator
(e.g.: “I TIM”)
- the access technology, that is
“GSM” or “UMTS”, in brackets
This list is initially empty: it shall be filled
by clicking on the “GET OPERATOR LIST”
button.
“[22201] I TIM (UMTS)”
Data Connection/Enable Flag to enable/disable the Mobile
Network connectivity OFF
Data Connection/
APN Mode
This parameter tells if the APN and
related parameters are automatically
retrieved
(based on SIM IMSI)
(Mode=Automatic) or the values given
in this page are used.
When APN Mode = Automatic, APN,
Authentication Type, Username and
Password parameters are disabled.
Automatic
Data Connection/APN Access Point Name, as given by the
Mobile Network Operator ibox.tim.it
Data Connection/Authentication
Type Type of authentication required;
possible
values are: “None”,
“CHAP/PAP”, “CHAP only”, “PAP
only”
None
Data Connection/Username Username needed for UMTS/GPRS
connectivity, as given by the Mobile
Network Operator; it may be empty,
if “Authentication Type” parameter user
17
Please note that the procedure to enable/disable the PIN locking functionality on the SIM is not performed by the
Device.
18
MCC = Mobile Country Code, MNC = Mobile Network Code