Seneca S6001-RTU, User Manual

Page: 23 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
23
Analog inputs and outputs are available on screw terminals 43-50, as shown in the following figure and
table.
4 analog current inputs (0-20 mA) Four active sensors are available from 43 to 46
screw terminals. Screw terminal 49 is a supply
voltage (+12 Vdc) for passive current sensor.
1 analog current output (0-20 mA) Available between 47 and 50 screw terminals.
1 analog voltage output (0-10 Vdc) Available between 48 and 50 screw terminals.
The Liquid Level Inputs are available on screw terminals 40-42, as shown in the following figure.
The analog level signals from screw terminals 40, 41, 42 can be used to control the level of liquid in a tank.
The supply voltage (12 Vdc @ 50mA) from screw terminals 38 and 37 can be used to connect, for example,
an acoustic alarm. Screw terminal 39 must not be connected.