USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
142
Current 4
ANALOG OUTPUT/Current
Value of analog current output (in
uA)
0..20000
ANALOG OUTPUT/Voltage
Value of analog voltage output (in
mV)
0..10000
ELECTRODES/Level
Liquid level value
0,1,2
ELECTRODES/Sensitivity
Sensitivity value applied in liquid
level measurement (in kΩ)
0..255
DIAGNOSTICS/Error Status
This parameter gives an information
about errors that might occur in the
I/O board. The value is a bitmask, as
specified in the column “Values”.
0: no error
Bit 9: flash memory error
DIAGNOSTICS/CRC Error Counter
This parameter counts the CRC
errors
occurring
in
the
communication between the CPU
board and the I/O board; if the value
continuously increases, it means
that there is some HW problem
>= 0
0 means “no CRC error”
If the Soft PLC application is not running, inputs/outputs values are not available, so the page appears like
in the following figure:
Summary of Contents for S6001-RTU
