Seneca S6001-RTU, User Manual

Page: 34 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
34

a “User Defined Function Block” (UDFB) library, in ST language, which simplifies the use of the
above FBs, providing a simpler and “higher level” access to their functionalities.
Furthermore, two project templates are available for Z-PASS2-S and S6001-RTU CPUs, respectively.
An installer program, called “Seneca StratON Package setup”, is available which automatically installs the
above Seneca libraries and templates. The installer can also be used to install the StratON IDE and Z-NET4
SW (see chapter 20).
The installer is available at the following link:
http://www.seneca.it/products/seneca-straton-package
If, for some reasons, the installer can’t be run, the above libraries and templates can be installed manually
as described in the following sub-paragraph.
8.1.1 Seneca libraries and templates installation
The following steps are needed to integrate the Seneca libraries and templates in the StratON IDE.
First, we must add the Seneca FB Library (file SenecaStratonLibrary.XL5) to the IDE, using the “Library
Manager” tool:
Select the “File / Open Library” option and enter the “Seneca” name to create the new Seneca library.