Seneca S6001-RTU, User Manual

Page: 55 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
55
To handle M-Bus devices, the following resources are provided:
- the “M-Bus” section web pages
- the MBUS_READ_CTL function
- the MBUS_WRITE_RAW function block
The M-BUS web pages lets you scan the bus, searching for devices, detecting either their primary addresses
or secondary addresses; it also lets you read the data records and slave information from a device and
create the configuration files to be imported in Straton PLC.
The MBUS_READ_CTL FB lets you start/stop the M-BUS acquisition;
the MBUS_WRITE_RAW FB lets you build and send a generic M-Bus frame, thus providing a flexible way to
send configuration commands to M-Bus devices.
16 OPC Unified Architecture (OPC UA) protocol
OPC Unified Architecture (OPC UA) is a standardized machine to machine communication
protocol for industrial 4.0 automation developed by the OPC Foundation.
OPC UA is a vendor-independent communication protocol and it’s based on the client-server principle.
The devices support both OPC-UA server and OPC-UA client protocols (up to 10 servers by using the OPC-
UA client Function Blocks).
17 Upgrading the firmware by USB pen
The Device firmware can be upgraded by means of a USB pen; a pen drive formatted with FAT32 file-
system is needed
.
The procedure is the following:
1) download the FW file from one of the following links:
http://www.seneca.it/products/z-tws4
http://www.seneca.it/products/z-pass2-s
http://www.seneca.it/products/s6001-rtu
the downloaded file is a .zip file; extract the FW file from it;
the FW file shall have a name like the following:
SW002940_xxx.bin
2) copy the file into the root of the USB pen
3) switch off the Device
4) insert the USB pen into the USB#1 port