2-7
2
Basic oper
a
tion
The following three methods are provided to supply media to the printer.
Roll feed: For normal supply of media from the scroller
Double-sided media feed: For double-sided printing (
Section 4)
Cut-sheet feed: For cut-sheet supply
This section describes roll feed and cut-sheet feed.
Roll media installation procedure
1
Put the media on the table.
If you want to use a dolly,
contact us. We have a
recommend product.
2
Adjust the roll spacer position according to the media width.
Roll spacer
Scroller
Do not move this roll spacer.
(1) Remove the two screws and move
the roll spacer to the center of the
media. There are three screwing
positions.
The roll spacer prevents the paper tube from bending at the center due to the
media weight.
–
–
–
–
Media installation and removal
