2-37
2
Basic oper
a
tion
Media installation and removal
Procedure to remove media from the scroller
1
Put the media roll on the table.
2
Remove the flange stopper and the flange spacer.
3
Remove the scroller.
(1) Rotate the handle counterclockwise.
(2) When a gap is generated between the
handle and the scroller shaft, remove
the scroller.
Note
Do not touch the claw of the scroller.
–
When no media is loaded on the scroller
1
The message appears on the LCD.
N O M E D I A L O A D E D
L O A D M E D I A
2
Replace media following the media installation/removal
procedure.
When replacing roll media due to jamming
Refer to [Section 5 When encounting a problem (How to clear media jams)].
