2-99
2
Basic oper
a
tion
<Nest function>
The nest function is a function to re-set the origin of print. For example, when printing a
small image of A4 size is printed on the media of 64-inch width, a large margin is created as
shown below. In such a case, by rewinding the printed media and re-setting the print start
origin, the margin can be effectively used for printing.
(First print)
(Rewinding of media)
(Second print)
Margin
Set the print start origin
Note
Complete this operation as immediately as possible. Or perform the cleaning as
the print heads dry and the print image quality is affected.
–
<Nest function>
1
Return the media by operating [Back Feed].
(
P.2-98 Backfeeding the media [Backfeed]
)
Note
Rewind the media after the printed image completely dries. If this function is
used while the media is not sufficiently dry, printed image obtained during the
first printing will be damaged.
–
2
Keep pressing the
key for 1.5
seconds in the online state (idle
mode), the carriage moves and the
nest function becomes available.
Align the
mark at the lower left of the
front panel of the carriage with the origin.
Origin
Nest function
N E S T O R I G I N S E T T I N G
* O K ?
