2-14
17
This sign is displayed when the
slack is insuffi
cient.
In case of use of sheet media, this
message is not displayed.
If the media slackness is insufficient, the
next operation will not be started.
-
-
C H E C K
S L A C K E N M E D I A
18
Press the tension bar to the peel roller’s upper part. Then create
a slack between the platen and the peel roller, by carrying the
tension bar to the rear side of the peel roller with a supply-side
feed switch (black).
Switch
Tension bar
Tension bar
Adjust the tension bar length and decide whether to attach a flange or not,
depending on the type and width of the media.
Examples of tension bar combinations
Size used
Tension bar length
L
48 inches (123 cm)
L, S
64 inches (164 cm)
L, S, S
80 inches (204 cm)
L, M, S, S
104 inches (264 cm)
