5-2
Before you regard the error as a printer failure, inspect or check the following and take
proper actions.
Inspection/check items at the time of problem
Power is not turned on.
Inspection/check item
Action
Connection of the power cord
Plug the power cable properly into a power outlet.
Power supply to power outlet
Supply power to the power outlet. Check whether proper
power voltage is supplied.
Power switch ON/OFF status
Turn on the power switch. (
P.2-3 "Power ON/OFF
procedure"
)
The paper guide does not heat after the heater is turned on.
Inspection/check item
Action
Printer status
The paper guide is heated during printing or when the
heater is turned on with the heater control menu. Print an
image or set the heater to ON to see if the paper guide is
heated. (
P.2-101 "Changing temperature using the
heater control menu"
)
Host computer RIP setting
The heater temperature can also be set by the RIP of the
host computer. Check the host computer setting.
Heater control menu
Turn on the heater (afterheater/printheater/preheater)
again, and then print an image or forcibly set the heater
to ON to see if the paper guide is heated.
Power voltage
Connect the printer to 200 VAC power.
The printer does not start or operate normally.
Inspection/check item
Action
Error LED ON and LCD message
Take appropriate actions according to the error message.
(
P.5-8 "When an error message is displayed"
)
When encounting a problem
