2-107
2
Basic oper
a
tion
To protect the print head from warp and feathering at both ends of media, use media
edge guards in the media feed path and slide it to meet the media width.
Media edge guards
(Wiping station side)
(Capping station side)
[Media edge guard specifications]
Capable of media thickness of up to 1 mm.
Decreases the print area.
Reduces the effect of the suction fan.
–
–
–
Note
Make the media edge guard usage setting in the MEDIA REG MENU from the
operation panel. The right and left margins of the media are controlled by this
setting.
When media edge guards are used, the right and left print area margins increase
to 10 mm. (When no media edge guard is used, the margins are 5 mm.)
When the media edge guard is stained, wipe it out.
Remove feathering that cannot be removed by the media edge guard beforehand
as it may cause nozzle-out.
–
–
–
–
How to use media edge guards
