2-106
The printer automatically adjusts the head height to the best height when the printer is
turned on or when media is set. To adjust the head height according to the media to be
used, select MEDIA REG MENU on the operation panel and adjust the head height.
Note
Adjust the head height so that the head does not contact with the media. Friction
of the head may cause poor firing of the head and degrade the print quality. On
the other hand, excessive head height from the media will also degrade the print
quality. Use the printer with the head height that is automatically adjusted by the
printer.
–
1
Set the printer to the offline state.
Press the
O N L I N E
key.
I N K M E D I A R E G
M E D I A M . A D V
2
Press the
key to display the
MEDIA REG MENU.
# S E L E C T M E D I A
> 0 1 : T Y P E 0 1
3
Press the
key and then
or
key to display [PH HEIGHT VAL].
# P H H E I G H T V A L
> 0 1 : + 0 . 0 m m
4
Press the
key, and enter the
head height adjustment value with
the
or
key.
The adjustment value range is: -0.3 to +1.0
mm.
# P H H E I G H T V A L
> 0 1 : + 1 . 0 m m
5
Press the
key to determine the
adjustment value.
How to use the head up/down mechanism
