4-5
4
P
rin
t mode and special prin
ting
Double-sided printing
4
When printing is completed, open the front cover and cut the
media.
At the end of the first-side printing, two lines are printed. One line is a reference
solid line to match print positions on the first and 2nd sides. The other line is a
reference dashed line for cutting. Cut the media at the supply side leaving these
two lines.
We recommend you to insert the blade of a box cutter into the gap between the platen
and the paper guide to cut the media.
For easy installation of the 2nd side of the media, it is recommended that you mark the
position of the reference solid line at both sides of the 2nd side.
–
–
Reference dashed line for cutting
Reference solid line on the 2nd side
Note
The drying time of printed media varies depending on printed images. Confirm
that printed media has dried, and then proceed to the next operation. Generally,
dry the printed first side for three hours or more (24 hours for higDENSITY print),
and then start 2nd-side printing.
Pay attention not to drop the used media so as to avoid messing up the floor.
–
–
5
Detach the supply-side scroller from the printer.
6
Detach the takeup-side scroller from the printer.
Note
Use a dolly that we recommend or the like to attach or detach the scroller with
sufficient care.
–
Scroller
Recommended dolly
