3-54
ADJUST MENU
This menu is used to set mechanical adjustment parameters. Press the
key to enable
the setting of mechanical adjustment parameters.
P R I N T E R S E T U P
A D J U S T H E A T E R
# T E S T P R I N T S
> N O Z Z L E P R I N T
(1) Adjustment pattern
Used to print the adjustment pattern that is used
for mechanical and electrical adjustments.
To stop printing, press the
CANCEL
key.
# T E S T P R I N T S
> N O Z Z L E P R I N T
<Parameter (choice input)>
NOZZLE PRINT
Print the nozzle check pattern.
ADJUSTMENT & CHECK
Print the adjustment check pattern.
PH TO PH
Print the head position adjustment pattern.
PH R&L ADJ PRINT
Print the head right and left adjustment pattern.
BIDIR ADJ PRINT2
Print the bidirectional adjustment pattern (for NORMAL1, NORMAL2,
QUALITY, and DENSITY).
BIDIR ADJ PRINT3
Print the bidirectional adjustment pattern (for DRAFT1).
BIDIR ADJ PRINT4
Print the bidirectional adjustment pattern (for FINE DRAFT).
EDGE SENSOR ADJ PRINT
Print the edge sensor adjustment pattern.
