2-21
2
Basic oper
a
tion
Media installation and removal
11
Open the tension bar guide’s cover.
12
Place the tension bar at the bottom of the tension bar guide.
Note
When the tension bar does not reach the tension bar guide’s bottom, feed the
media with the operation panel’s FEED menu. Confirm that tension bar was
placed securely at the tension bar guide’s bottom.
–
13
Close the tension bar guide’s cover.
14
Press the take-up direction switch according to the take-up
direction.
Take-up direction switch
OFF
Outer take-up
- OFF
Inner take-up
Note
If the media slack is secured excessively, the take-up reel unit may keep winding
the media for more than the prescribed time, and a take-up timeout error occurs.
In such a case, turn off the take-up direction switch, and then press the switch
again.
–
