4-8
12
S e l e c t t h e m e d i a s i d e t o b e
supplied.
Select "BACK" with the
or
key. You
can change the setting with the
key.
If you press the
CANCEL
key, the setting
remains unchanged.
S E L E C T M E D I A
R O L L / S H E E T : B A C K
13
Select a media type.
Select the media type with the
or
key. You can change the setting with the
key. If you press the
CANCEL
key,
the setting remains unchanged.
S E L E C T M E D I A
M E D I A : P A P E R
14
Confirm slack of supply side.
If the media slack is insufficient, the
printer does not proceed to the next
operation.
–
C H E C K
S L A C K E N M E D I A
15
The media setting operation starts
automatically.
When the media setting is successfully
completed, the printer returns to the
online or offline state.
If the media setting is not completed,
an error message appears. Retry the
procedure from step
8
.
–
–
P R E P A R I N G M E D I A
P L E A S E W A I T
Note
Before starting 2nd-side printing, change the settings of "SUCTION FAN LEVEL"
and "MEDIA ADV MODE" from the operation panel according to the media to be
used. For media that is easy to adhere, set "SUCTION FAN LEVEL" to "LOW" and
"SUCTION FAN LEVEL" to "BACK & FWD1 or BACK & FWD2."
–
The print head should be cleaned before starting 2nd-side printing.
–
