Segway SE-3 Patroller, Service Manual

Page: 86 / 148

SE-3 Patroller
78
Siren
Tools Required: 4 mm hex wrench
10 mm socket wrench
Torque wrench
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module ( page 8 )
b. Storage Trays ( page 13 )
c. Bib Panel ( page 14 )
d. Glove Box ( page 16 )
e. Main Splash Guard ( page 26 )
3. Locate the Siren on the front of the frame.
See Figure 108 .
4. Reach behind the Right Side Panel and disconnect
the siren harness. See Figure 109 .
5. Using a 10 mm socket wrench, loosen the nut on each
side of the Siren. See Figure 111 .
6. Pull the Siren off the bracket.
7. Using a 4 mm hex wrench, remove the two fasteners
holding the bracket to the frame. See Figure 110 .
8. Remove the bracket.
Figure 108: Siren
Figure 109: Siren Harness Connector
Siren