Segway SE-3 Patroller, Service Manual

Page: 35 / 148

27
Overview
The SE-3 Patroller has three wheels: one front wheel and two rear wheels. For
general tire care information, refer to the
Segway SE-3 Patroller User Manual.
When to Replace
Replace a Tire/Wheel Assembly under any of the following conditions, including, but
not limited to:
• Persistent leak in tire after reinflation.
• Wheel is cracked or bent.
• Tire is flat, cracked, or excessively worn.
Excess wear is determined as follows:
– Front tire tread depth is less than 2 mm.
– Rear tire tread depth is less than 3.8 mm
or tread is worn down flush with the tread wear indicators.
Tire inflation pressure can dramatically affect range, traction, and tread wear.
Ensure tires are properly inflated as follows:
• Front: 22 psi (1.52 Bar; 152 kPa)
• Rear: 25 psi (1.72 Bar; 172 kPa)
Safety
WARNING!
When jacking up the SE-3 Patroller, make sure the SE-3 Patroller is stable or use
a jack stand to stabilize it while the wheel is off the ground. Failure to stabilize the
SE-3 Patroller could result in death or serious injury from the vehicle falling over.
Tire/Wheel Assemblies
Contents
• Front Tire/Wheel
• Rear Tire/Wheel