Segway SE-3 Patroller, Service Manual

Page: 28 / 148

SE-3 Patroller
20
Side Panel
The Side Panels attach to a floating bracket at the front of the
steering column.
Tools Required: 4 mm hex wrench
Torque wrench
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module ( page 8 )
b. Storage Trays ( page 13 )
c. Bib Panel ( page 14 )
d. Glove Box ( page 16 )
e. Front Cowl ( page 17 )
f. Light Cluster ( page 18 )
3. Using a 4 mm hex wrench, remove the four front
fasteners (two each side) as shown in Figure 20 .
4. Using a 4 mm hex wrench, remove the three side
fasteners as shown in Figure 21 .
5. Using a 4 mm hex wrench, remove the bracket
fastener as shown in Figure 22 .
6. Lift the Side Panel off of the frame. Pull the bottom
out then lift up.
Figure 20: Front Fasteners
Figure 21: Side Fasteners
24270-00004
4.0 N-m (3.0 in-lbf)
Side Panel
Side Panel
Left 24129-00001
Right 24130-00001
24270-00004
5.5 N-m (4.0 ft-lbf)
Body Panels