Segway SE-3 Patroller, Service Manual

Page: 80 / 148

SE-3 Patroller
72
Control Cluster
Tools Required: T15 Torx wrench
Wire cutters
Torque wrench
Digital level
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module ( page 8 )
b. Storage Trays ( page 13 )
c. Bib Panel ( page 14 )
d. Glove Box ( page 16 )
e. Front Cowl ( page 17 )
3. Disconnect the wire harness. See Figure 103 .
4. Using a pair of wire cutters, remove the two cable ties
on the steering column.
5. Using a T15 Torx wrench, loosen the three fasteners
on the under side of the Control Cluster.
See
Figure 104 .
6. Pull the two halves apart, and lift the Control Cluster
off the Handlebar.
Figure 103: Control Cluster Harness
Controls