Schweitzer Engineering Laboratories SEL-700G Series, Instruction Manual

Page: 417 / 824

SET.41
of 68
Date Code 20170814 Instruction Manual SEL-700G Relay
SEL-700G Settings Sheets
Global Settings (SET G Command)
VY COMP ANGLE (–179.99 to 180.00°) (Shown for Slot E = 71/75) VYCOMP :=
VS COMP ANGLE (–179.99 to 180.00°) (Shown for Slot
E
= 71/75/72/76/74) VSCOMP :=
CURRENT DATA SET (I1, ALL, NA) PHDATAI :=
CURRENT SOURCE (IX, IY, BOTH) PHCURR :=
IX COMP ANGLE (–179.99 to 180.00°) (Hidden if PHCURR = IY or PHDATAI = NA.) IXCOMP :=
IY COMP ANGLE (–179.99 to 180.00°) (Hidden if PHCURR = IX or PHDATAI = NA.) IYCOMP :=
NUM ANALOGS (0–4) NUMANA :=
NUM 16BIT DIGTAL (0, 1) NUMDSW :=
TRIG REASON BIT 1 (SEL
OGIC
) TREA1 :=
TRIG REASON BIT 2 (SEL
OGIC
) TREA2 :=
TRIG REASON BIT 3 (SEL
OGIC
) TREA3 :=
TRIG REASON BIT 4 (SEL
OGIC
) TREA4 :=
TRIGGER (SEL
OGIC
) PMTRIG :=
Time and Date Management
CTRL BITS DEFN (NONE, C37.118) IRIGC :=
OFFSET FROM UTC (–24.00 to 24.00) rounded up to quarter UTC_OFF :=
MONTH TO BEGIN DST (OFF, 1–12) DST_BEGM :=
WEEK OF THE MONTH TO BEGIN DST (1–3, L) L = Last week of the month
(Hidden if DST_BEGM := OFF)
DST_BEGW :=
DAY OF THE WEEK TO BEGIN DST (SUN, MON, TUE, WED, THU, FRI, SAT)
(Hidden if DST_BEGM := OFF)
DST_BEGD :=
LOCAL HOUR TO BEGIN DST (0–23) (Hidden if DST_BEGM := OFF) DST_BEGH :=
MONTH TO END DST (1–12) (Hidden if DST_BEGM := OFF) DST_ENDM :=
WEEK OF THE MONTH TO END DST (1–3, L) L = Last week of the month
(Hidden if DST_BEGM := OFF)
DST_ENDW :=
DAY OF THE WEEK TO END DST (SUN, MON, TUE, WED, THU, FRI, SAT)
(Hidden if DST_BEGM := OFF)
DST_ENDD :=
LOCAL HOUR TO END DST (0–23) (Hidden if DST_BEGM := OFF) DST_ENDH :=
Breaker Failure
52A INTERLOCK (Y, N) 52ABF :=
BRKRX FAIL DELAY (0.00–2.00 s) (Hidden if Slot
Z
= 84/88) BFDX :=
BRKRX FAIL INIT (SEL
OGIC
) (Hidden if Slot
Z
= 84/88) BFIX :=
BRKRY FAIL DELAY (0.00–2.00 s) (Hidden if not available) BFDY :=
BRKRY FAIL INIT (SEL
OGIC
) (Hidden if not available) BFIY :=