manualshive.com logo in svg

Schweitzer Engineering Laboratories SEL-700G Series, Instruction Manual

The Schweitzer Engineering Laboratories SEL-700G Series Instruction Manual is your comprehensive guide to effectively operate and maintain your SEL-700G product. This essential manual is available for free download from manualshive.com, ensuring easy access to valuable information to maximise the performance of your SEL-700G Series.

Share
Download
background image

A.2

SEL-700G Relay

Instruction Manual

Date Code 20170814

Firmware and Manual Versions

Firmware

➤

Increased the resolution of the slip frequency and the fre-
quency of the VS channel to three decimal places in the 
compressed generator synchronism report (CGSR).

➤

Added LOPBLKX and LOPBLKY SEL

OGIC

 control equa-

tion settings to allow for blocking of the LOP logic under 
user-defined conditions. Also raised the minimum thresh-
old for positive-sequence voltage V1 from 5 V to 10.5 V.

SEL-700G-R108-V0-Z004002-D20150410

➤

Enhanced the differential element (87) by adding a high 
security mode of operation to improve the security of the 
element for external events, such as faults or transformer 
energization, when there is severe CT saturation. This 
enhancement includes three new settings and twenty six 
new Relay Word bits.

➤

Modified the differential element (87) setting CTCX to 
make it user settable with the range of 0 or 12. In all previ-
ous firmware versions, CTCX was automatically set to 0 
or 12, depending on the application, and hidden. Following 
a firmware upgrade and settings conversion using 

AC

SEL

ERATOR

 QuickSet SEL-5030 Software, the user will 

need to review the CTCX setting and manually update it to 
suit the application.

➤

Modified the firmware to hide the X side directional 
element settings if the setting ORDERX := OFF.

➤

Changed the minimum values of the FPLSMIND and 
VPLSMIND settings from 0.1 to 0.02 to allow finer fre-
quency and voltage control pulses in the autosynchronizer 
function.

➤

Revised the firmware to allow the user to set up to two 
backup elements. The revised EBUP setting range allows 
the user to choose distance (DC) and voltage restraint (V), 
or distance (DC) and voltage controlled (C) overcurrent 
elements.

➤

Revised the firmware for Trip Logic such that RSTTRGT is 
processed on the rising edge.

➤

Addressed an issue in the firmware where the rotating dis-
play stops rotating when the setting RSTTRGT is set to 1 or 
is asserted continuously.

➤

Revised the firmware to hide the Relay Word bits associ-
ated with overcurrent elements based on the part number of 
the relay.

➤

Revised the REF element logic to improve the sensitivity 
for applications with different neutral and phase CT ratings.

➤

Modified the firmware to reset Virtual Bits when a new 
CID file is sent to the relay.

➤

Resolved an issue in R106 and R107 firmware revisions 
with the relay becoming unresponsive on power-up if the 
setting NETPORT was set to D in dual Ethernet models 
with the setting NETMODE set to FIXED or FAILOVER.

20150410

SEL-700G-R107-V0-Z003002-D20140806

➤

Resolved an issue with R106 firmware in which the values 
of V1 and I1 synchrophasor quantities were always 
reported as zero.

➤

Resolved a synchrophasor voltage magnitude issue for 
applied voltages of 200 V or higher with the settings com-
bination FNOM := 50, MRATE := 25, PHCOMP := Y, and 
PMAPP := NARROW.

20140806

Table A.1

Firmware Revision History

(Sheet 2 of 5)

Firmware Identification (FID) Number

Summary of Revisions

Manual Date Code

Summary of Contents for SEL-700G Series

























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SEL-700G Series

VAMP 210 Operation And Configuration Instructions preview
210
Brand: VAMP Pages: 94
Pilz PNOZ X2 Operating Instructions Manual preview
PNOZ X2
Brand: Pilz Pages: 12
Zy QJ Series Operating Instructions Manual preview
QJ Series
Brand: Zy Pages: 6
ABB REJ 523 Technical Reference Manual preview
REJ 523
Brand: ABB Pages: 68
ABB 2CDC 113 016 M9701 Operating Instructions Manual preview
2CDC 113 016 M9701
Brand: ABB Pages: 10
ABB 41-331.21 Instruction Leaflet preview
41-331.21
Brand: ABB Pages: 12
ABB CM-TCN Manual preview
CM-TCN
Brand: ABB Pages: 42
ABB CM Instruction Leaflet preview
CM
Brand: ABB Pages: 12
ABB CIRCUIT SHIELD 237F Series Instructions Manual preview
CIRCUIT SHIELD 237F Series
Brand: ABB Pages: 15
ABB COV Series Instruction Leaflet preview
COV Series
Brand: ABB Pages: 24
ABB CVX Instruction Leaflet preview
CVX
Brand: ABB Pages: 20
ABB CT-AHS Safety Instruction preview
CT-AHS
Brand: ABB Pages: 25
ABB ITH-T Series Installation, Operation & Maintenance Instructions Manual preview
ITH-T Series
Brand: ABB Pages: 10
ABB KLF Series Instruction Leaflet preview
KLF Series
Brand: ABB Pages: 22
ABB CM-MSS.12 Operating And Installation Instructions preview
CM-MSS.12
Brand: ABB Pages: 8
ABB CP Series Instruction Leaflet preview
CP Series
Brand: ABB Pages: 12
ABB CW Series Instruction Leaflet preview
CW Series
Brand: ABB Pages: 12
ABB CT-MXS Operating And Installation Instructions preview
CT-MXS
Brand: ABB Pages: 12

Brands by name

Popular brands

Load more brands