Schweitzer Engineering Laboratories SEL-700G Series, Instruction Manual

Page: 748 / 824

H.10
SEL-700G Relay Instruction Manual Date Code 20170814
Synchrophasors
Ethernet Port Settings for IEEE C37.118 Synchrophasors
Ethernet Port Settings for IEEE C37.118 Synchrophasors
IEEE C37.118 compliant synchrophasors are available via serial or Ethernet
port. The associated Ethernet port settings are shown in Table H.6.
Ethernet port setting EPMIP cannot be set when Global setting EPMU := N.
Synchrophasors must be enabled (EPMU := Y) before EPMIP can be set.
Definitions for some of the settings in Table H.6 are discussed further in the
following text.
Table H.6 SEL-700G Ethernet Port Settings for Synchrophasors
Setting Description Default
EPMIP
a
a
Setting is hidden when EPMU := N.
Enable PMU Processing (0–2) 0
b
b
Set EPMIP := 1 or 2 to access other settings and to enable IEEE C37.118 protocol
synchrophasors on this port. Setting EPMIP is not available when Global setting EPMU is set
to N.
PMOTS1 PMU Output 1 Transport Scheme
(OFF, TCP, UDP_S, UDP_T, UDP_U) OFF
PMOIPA1 PMU Output 1 Client IP
(Remote) Address (www.xxx.yyy.zzz)
c,d
c
Setting hidden when PMOTS1 := OFF.
d
Port number must be unique.
192.168.1.3
PMOTCP1 PMU Output 1 TCP/IP (Local)
Port Number (1–65534)
c,d
4712
PMOUDP1 PMU Output 1 UDP/IP Data
(Remote) Port Number (1–65534)
c,e,f
e
Setting hidden when PMOTS1 := TCP.
f
Port numbers must be unique for PMOUDP1, PMOUDP2, and DNPUDP1–3, if active.
4713
PMOTS2 PMU Output 2 Transport Scheme
(OFF, TCP, UDP_S, UDP_T, UDP_U) OFF
PMOIPA2 PMU Output 2 Client IP
(Remote) Address (www.xxx.yyy.zzz)
g
g
Setting hidden when PMOTS2 := OFF.
192.168.1.4
PMOTCP2 PMU Output 2 TCP/IP (Local)
Port Number (1–65534)
d,g
4722
PMOUDP2 PMU Output 2 UDP/IP Data
(Remote) Port Number (1–65534)
f,g,h
h
Setting hidden when PMOTS2 := TCP.
4713