Schweitzer Engineering Laboratories SEL-700G Series, Instruction Manual

Page: 692 / 824

F.6
SEL-700G Relay Instruction Manual Date Code 20170814
IEC 61850 Communications
IEC 61850 Operation
Reports
The SEL-700G supports buffered and unbuffered report control blocks in the
report model as defined in IEC 61850-8-1:2004(E). The predefined reports
shown in Figure F.1 are available by default via IEC 61850.
Figure F.1 SEL-700G Predefined Reports
There are 12 report control blocks, six buffered reports and six unbuffered. For
each report control block, there can be just one client association, that is, only
one client can be associated to a report control block (BRCB or URCB) at any
given time. The number of reports (12) and the type of reports (buffered or
unbuffered) cannot be changed. However, by using
AC
SEL
ERATOR
Architect,
you can reallocate data within each report dataset to present different data
attributes for each report beyond the predefined datasets. For buffered reports,
connected clients can edit the report parameters shown in Table F.4.
Table F.4 Buffered Report Control Block Client Access
RCB Attribute
User changeable
(Report Disabled)
User changeable
(Report Enabled)
Default Values
RptId YES BRep01–BRep06
RptEna YES YES FALSE
OptFlds YES seqNum
timeStamp
dataSet
configRef
reasonCode
dataRef
BufTm YES 500
TrgOp YES dchg
qchg
IntgPd YES 0
GI YES
a b
a
Exhibits a pulse behavior. Write a one to issue the command. Once a command is accepted, it
returns to zero. Always read as zero.
b
When disabled, a GI is processed and the report buffered if a buffer has been previously
established. A buffer is established when the report is enabled for the first time.
YES
a
FALSE
PurgeBuf YES
a
FALSE
EntryId YES 0