Schweitzer Engineering Laboratories SEL-700G Series, Instruction Manual

Page: 398 / 824

SET.22
of 68
SEL-700G Relay Instruction Manual Date Code 20170814
SEL-700G Settings Sheets
Group Settings (SET Command)
MAX SLIP FREQ (0.05–0.5 Hz) 25SF :=
MAX ANGLE 1 (0–80°) 25ANG1Y :=
MAX ANGLE 2 (0–80°) 25ANG2Y :=
SYNCP PHASE (VAY, VBY, VCY, 0, 30, 60, 90, 120, 150, 180, 210, 240, 270, 300,
330° lag VAY) (Hidden if DELTAY_Y := DELTA)
SYNCPY :=
SYNCP PHASE (VABY, VBCY, VCAY, 0, 30, 60, 90, 120, 150, 180, 210, 240, 270,
300, 330° lag VABY) (Hidden if DELTAY_Y := WYE)
SYNCPY :=
BRKR CLOSE TIME (OFF, 1–1000 ms) TCLOSDY :=
BLK SYNC CHECK (SEL
OGIC
) BSYNCHY :=
Autosynchronism
(Hidden if Slot E = Empty/ 73/77, Slot Z = 84/88, or E25X := N)
AUTO SYNC EN (NONE, DIG) EAUTO :=
(All Autosynchronism settings are hidden if EAUTO := NONE)
FREQ SYNC TIMER (5–3600 s) FSYNCT :=
FREQ ADJ RATE (0.01–10.00 Hz/s) FADJRATE :=
FREQ PULS INTRVL (1–120 s) FPULSEI :=
FREQ PULS MIN (0.02–60.00 s) FPLSMIND :=
FREQ PULS MAX (0.10–60.00 s) FPLSMAXD :=
KICK PULS INTRVL (1–120 s) KPULSEI :=
KICK PULS MIN (0.02–2.00 s) KPLSMIND :=
KICK PULS MAX (0.02–2.00 s) KPLSMAXD :=
FMATCH START (SEL
OGIC
) FSYNCST :=
VOLT SYNC TIMER (5–3600 s) VSYNCT :=
VOLT ADJ RATE (0.01–30.00 V/s) VADJRATE :=
VOLT PULS INTRVL (1–120 s) VPULSEI :=
VOLT PULS MIN (0.02–60.00 s) VPLSMIND :=
VOLT PULS MAX (0.10–60.00 s) VPLSMAXD :=
VMATCH START (SEL
OGIC
) VSYNCST :=
Demand Metering
ENABLE DEM MTR (THM, ROL) EDEM :=
DEM TIME CONSTNT (5, 10, 15, 30, 60 min) DMTC :=
X-Side Demand Metering (Hidden if Slot Z = 84/88)
PH CURR DEM LVL (OFF, 0.50–16.00 A [5 A I
XNOM
], 0.10–3.20 A [1 A I
XNOM
]) PHDEMPX :=
RES CURR DEM LVL (OFF, 0.50–16.00 A [5 A I
XNOM
], 0.10–3.20 A [1 A I
XNOM
]) GNDEMPX :=
3I2 CURR DEM LVL (OFF, 0.50–16.00 A [5 A I
XNOM
], 0.10–3.20 A [1 A I
XNOM
]) 3I2DEMPX :=