Schiller AT-102, Service Handbook

Page: 86 / 140

4.8
AT-102 Service Handbook
Prerequisites, Test Equipment, Tools,
and Accessories
The following list gives the tools, test equipment and accessories required to carry out all
removal and replacement procedures, functional tests, calibration procedures and
adjustments that can be carried out on the AT-102. The test equipment given here is
general. If specific recommendation for test equipment is required, please contact the
SCHILLER service department.
Digital Voltmeter
Selection of cross-bladed, posi-drive and flat-bladed screwdrivers
Cleaning agent such as Trichlorethylene
Selection of spanners
Flat ended pliers
Double-sided tape
ECG Patient Simulator, e.g. phantom 320.
SCHILLER Patient Cable
Low abrasion antistatic mat
General Prerequisites
The unit must be placed on an antistatic mat and antistatic precautions observed
when any maintenance is carried out on the AT-102. The room temperature should be
between 18 and 28 degrees.
The safety notices at the beginning of this section must be read and understood
before carrying out any of the removal and replacement procedures detailed here.
Part Numbers
The part numbers for all replaceable items are given in Chapter 6.