Schiller AT-102, Service Handbook

Page: 48 / 140

1.30
AT-102 Service Handbook
System Settings
Obtaining a printout of all current settings
To obtain a printout press the `PRINT SETUP` softkey
A printout of the defined settings will be produced and gives the following information,
depending on the installed software:
Unit designation Software version, Software options installed (C = Interpretation, M
= Memory (standard), S = Stress) and Serial number of the unit
ECG Format (1 and 2) Speed Default speed setting
Auto printout Long (ooo), Short (o) or Suppressed (-)
MECG Average cycles as defined in auto ECG
recording setup (e.g. 4 * 3 (25 mm/s) + 2)
Rhythm leads Leads selected for R1, R2 resp.
Measurements Print - Enabled (+) or Suppressed (-)
Marks Print - Enabled (+) or Suppressed (-)
Interpretation Print - Enabled (+) or Suppressed (-)
Leads Sequence Standard (S) or Cabrera (C)
Signals Printout of signals - Sequential or
Simultaneous
Auto Centering Enabled (+) or Suppressed (-)
Lead Group Rhythm, V9, V4r, V6r, DAJ, ON (+) or OFF (-)
for each lead group