Schiller AT-102, Service Handbook

Page: 21 / 140

1.3
Article Number 2. 540 028
SCHILLER AG 2002
AT-102 ECG Service Handbook
Section 1
Operating Elements
Introduction
Operating Philosophy Overview
There are broadly four types of data display as follows
Data Acquisition and In this screen the real-time ECG is displayed. From this
ECG Recording Screen screen a continuous printout can be initiated and/or an
auto recording can be made. In auto mode 10 seconds of
ECG data is analysed and averaged and the results given
on a printout. The format and data of an auto mode printout
is independent of the screen display.
An auto mode recording can also be stored in the memory
for later print or transmission.
Memory Screen In this screen stored recordings can be accessed.
Patient Data Screen Patient data entry via the keypad.
Data Entry and Setup In these screens all system settings, resting and exercise
ECG settings, and spiro settings are made.
Initiating Functions or Tasks
Most functions and tasks are initiated by the 5
softkeys situated immediately below the LCD.
The function of the softkeys varies according to
the screen displayed and is displayed on the
LCD immediately above the key itself.
During data acquisition, further dedicated
function keys are provided to make an auto
mode recording (START) and to stop a manual
printout (STOP). The top line of the
alphanumeric keypad, additionally enables
direct settings of lead group, trace speed and
sensitivity, filter on/off and other functions, for
both the real-time display and (manual)
printout.