Schiller AT-102, Service Handbook

Page: 49 / 140

1.31
Article Number 2. 540 028
SCHILLER AG 2002
AT-102 ECG Service Handbook
Section 1
Operating Elements
System Settings
Filter Baseline Filter 0.05, 0.15 or 0.30 Hz
Mains Filter 50, 60 Hz or OFF (-)
Myogram Filter 25 or 35 Hz, ON (+) or OFF (-)
SSB Filter Smoothing Filter Enabled (+) or Suppressed
(-)
SSF Filter Baseline Stabiliser Enabled (+) or
Suppressed (-)
Interpretation Sensitivity Low (-) or high (+) sensitivity
A30 Patient age is assumed to be < 30 (-)
or >30 (+)
U ‘Unconfirmed report’ is written (+) or
suppressed (-)
Abnormal Normal / Abnormal printed Enabled (+) or
Suppressed (-)
Comm Baud rate 115200, 57600, 38400, 28800, 14400 or 9600.
This is followed by parity setting (Y/N), bits
and number of stop bits.
Mode Line or Modem
Spiro F=f(v) Enabled (+) or Suppressed (-)
Flow =f(V) Enabled (+) or Suppressed (-)
Diagn. Enabled (+) or Suppressed (-)
PEFD (l/min) Enabled (+) or Suppressed (-)
Axis 5, 10 or 20 mm/s
Stress Bike 900 / 911 or SECA CT100 or none
Prot 252525 or user
TM ETM435/TM4000ES or RAM 770CE or MTM-
1500 or none
Prot Bruce or user
BP Manual, automatic of none
Stage Print leads and format
ST Lead Defined lead for ST Measurement
J- Point J plus 20ms, 40ms, 60ms, or 80ms
Date and Time System date and time, and user ID (if set)