Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Counting module
Input/output (I/O) modules
6-90
6
Programming:
Based on PCD user program and pre-programmed
function blocks (FB).
Count modes:
Selectable with jumper
Terminals:
Pluggable 10-pole screw terminal block (4 405 4847 0),
for wires up to 1.5 mm²
LEDs and connection terminals
“A”
Input “A”
1
“B”
Input “B”
2
“En” (Enable) Counter active 0
“CCO”
Output “CCO” 3
9
8
7
6
5
4
3
2
1
0
A
B
CCO
CCO
B
A
En
SC
x1
x2
Bus connector
GAL*) for adressing
GAL*) for count modes
Jumper for count modes
LEDs
Screw terminals
(*) GAL = Generic Array Logic)
Changing the jumpers
On this circuit board there are components that are sensitive to electrostatic dis-
charges. For further information, refer to Appendix B, "Icons"
