Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Digital output modules
Input/output (I/O) modules
6-25
6
For every 2 outputs, a 3-colour LED is fitted:
LED is
O0 O1
O2 O3
O4 O5
O6 O7
O8 O9
O10 O11
O12 O13
O14 O15
off
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
Green
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Yellow
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SBC provides a wide range of pre-configured cables with a 34-pole ribbon connector
at one or both ends.
These connection cables can be plugged at one end into the PCD2.E460 I/O module
and at the other end into an I/O terminal adapter.
The following adapters are obtainable from SBC:
terminal adapters for connecting 3-wire sensors to individual terminals for Signal,
Plus and Minus; terminal adapters for connecting 16 I/Os with and without LED and
relay interface; and terminal adapters with changeover contacts for signal conversion
for digital output modules.
Further information can be found in the Manual on
"System cables and connection system"
26/792.
The following materials can be ordered from ‘3M’:
●
Socket connector 34-pole
Type 3414-6600
●
(Metal strain relief) *)
Type 3448-2034
●
(Handle for socket connector 34-pole) *) Type 3490-3
Matching cables can be ordered in reels from '3M':
●
Ribbon cable 34-pole,
grey with pin 1 identification
Type 3770/34 or 3801/34
●
Round cable 34-pole,
grey with pin 1 identification
Type 3759/34
*) optional