SATO SG112 ex, Programming Reference Manual

Page: 59 / 516

58
[Supplementary Explanation]
- If Small Label Size <PD> parameters do no match those of Media Size <A1>, an error occurs.
In this case, Format <_N> and Variable Data <_D> following the <PD> will be ignored.
- Small Label Size <PD> automatically calculates the number of labels in horizontal direction.
- When both Media Size <A1> and Small Label Size <PD> are used, <A1> should appear within
the set of commands from Start Code <A> to Stop Code <Z> that is used by <PD>. When <PD>
command is not present, <A1> should always appear within own set of commands from <A> to
<Z>.
- If the item includes Small Label Size <PD>, functionalities of status 5 (Item Number check, BCC
check, Bluetooth CRC check) will not be activated even when they are enabled.
Cut posotion
d
(For d=2 )
a
b
c
La
be
l fe
ed
d
ire
ct
ion
[Additional information about the margin position]
The base reference position of Media Size <A1> is used for the calculation of the number of labels
in horizontal direction, thus there may be a margin to the right in the feed direction depending on the
media size and the width of the small label.
When the size in the horizontal direction of Media Size <A1> = 3200 dots, the media size in width
of Small Media Size <PD> = 700 dots, the distance between labels = 0, the number of labels in
horizontal direction is 4, which results in 400 dots margin to the right.
[Coding Example 2]
Vertical dimension: 600, Horizontal dimension: 700, Size in between labels: 0, Quantity of multiple
cut labels: 0
<A>
<A1>06363200
<PD>,600,700,0,0
<_F>
<V>100<H>200<L>0101<X23>,0Header label
<_Q>,1
<_F>
<V>100<H>200<L>0202<X23>,0ABCD
<V>200<H>200<L>0202<B>103200*11111*
<_Q>,6
<_F>
<V>100<H>200<L>0101<X23>,0Footer label
<_Q>,1
<Z>
Print result